CF MOTO CF125T-22A, Руководство по обслуживанию

Страница: 7 / 239

0DLQWHQDQFH
Disassembly&installation
Must use CFMOTO genuine parts or recom-
mended parts for components,lubrication or
grease.
The parts of each system shall be arranged and stored
separately, so that the parts can be assembled to the
original places.
The parts shall be washed and the cleanser shall
be blown away by compressed air prior to deter-
mination when they are disassembled and
inspected. The working surface shall be lubricated
before assembly.
Insert and arrange the bolts one by one and make
sure the insertion volume of each bolt is equal
before inserting them, when the bolt length is
unidentified.
Please clean the dirt, dusts on the vehicle before
maintenance.
The gasket, O-ring, piston pin retainer and split
pin must be renewed after disassembly.
The elastic retainer will deform if it is opened too
wide upon disassembly, then it will easily fall off
when assembled again. Please do not use the elas-
tic retainer that is already loose and without
elasticity.
Inspect the necessary sites upon disassembly,
measure the relevant data, so that the original
status can be resumed after assembly.
The fasteners such as bolts, nuts and screws shall
be pre-fastened, and then be fastened on the di-
agonal according to regulated fastening torque in
the principle of from big to small, from inside to
outside.
All manuals and user guides at all-guides.com