CF MOTO CF125T-22A, Руководство по обслуживанию

Страница: 54 / 239

3 Inspection & Adjustment
Install the spark plug.
Note
To avoid damage to the thread of spark plug hole,
when installing the spark plug, revolve it into
cylinder head with hand and then tighten it with
a spanner.
If the spark plug is a new one, screw by one-quarter
after the sealing gasket contacts the joint face.
If the spark plug is a used one, tighten it according
to the recommended torque.
Torque: 18N m(1.8kgf m)
Install the spark plug cap.
Lubrication device
Inspection of the engine oil
Warm up the engine.
Stop the engine and remove the oil dip rod and
clean it. Park the scooter on an ground.
Insert the oil dip rod (DO NOT screw in) and
check engine. oil level 2-3 minutes after the
engine stopped.
If oil is between the upper and lower limit,
oil is sufficient.
If oil is near the lower limit, add oil
till the upper limit.
Recommended engine oil:
Special engine oil for 4-stroke motorcycle:
SAE10W-40,20 W - 50,
In case of using substitutes, select from following
ranges:
API classification: SE or SF type engine oil.
Note
Choose engine oil according to the
viscosity-temperature chart on the right.
Install the oil dip rod, and tighten it.
Replacing engine oil
Park the scooter with main stand.
Start engine to warm up.
Stop the engine, Remove the oil dip rod,
oil drain bolt and sealing gasket, drain the oil.
Keep the scooter inclined left-side and
press the start button 2~3times.
All manuals and user guides at all-guides.com