CF MOTO CF125T-22A, Руководство по обслуживанию, Страница: 49 / 239

&)0272
Brake pump comp.
<Fluid level>
Check the brake fluid level
When the brake fluid level is near to the lower limit,
check brake pump,
brake hoses and leakages at the joints.Remove the
two mounting screws
on oil cup cap, take down the cap, add DOT3 or DOT4
brake liquid till the
upper limit.
¡¤
Do not mix with dust or water when adding brake
fluid.
¡¤
Use only the recommended brake fluid to avoid
chemical reaction.
¡¤
Brake fluid may cause damages to the surface of
the plastic
and rubber parts. Keep the fluid away from these parts.
¡¤
Slightly turn the handlebar left and right till the brake
pump
comp. is in the horizontal status, then remove the oil
cup cap.
Brake disk, Brake Pad
< Wear of brake Pad >
Check the brake pad from the mark as indicated.
Replace the brake pad if the wear has reached posi-
tion
of wear limit trough.
Note
The brake pad must be replaced with a whole
set.
Check and replacement of the brake disk.
Check if there is any were or damage on the disk,
when the brake disk thickness is
¡Ü
3 mm, replace the
brake disk.
Min. limited thickness of the brake disk: 3mm
Replacement of Oil
<
Replacing brake liquid
>
Replace brake liquid once every year.
All manuals and user guides at all-guides.com