Ceragon FibeAir IP-20C-HP, Руководство по установке

Страница: 25 / 204

Installation Guide for FibeAir IP-20C-HP
Page 25 of 204
Ceragon Proprietary and Confidential
2.4.4 Marketing Models for OCU Unit
This section explains how to read marketing models for the IP-20C-HP OCU.
Constructing a marketing model for the purpose of equipment order should
always be done using a configurator.
The OCU uses the following marketing model structure:
FXDHff-xxxYZccT-mmmNZddT-t
The placeholders in this structure are described in Table 7 .
Note: Not all fields are always necessary to define a valid marketing model. If
a specific field is not applicable, it should be omitted.
Table 7: Placeholder Definitions for OCU Marketing Models
Placeholder in
Marketing Model Description Possible Values
ff Frequency band L6,U6,07,08,11
xxxY, mmmN 1
st
Channel Filter TRS and
block indication (Ceragon
internal)
xxx - TRS 3 figures in [MHz].
Y - Letter to indicate frequency block.
Example: 266A
The frequency block is a Ceragon internal parameter
which defines different channelization using the same
TRS and frequency band.
Z, N Indicating the Channel Filter
channel bandwidth
designator Channel Filters Channel Bandwidth Designator
{A/B/C/D/E}
A = 28 MHz
B = 40 MHz
C = 56MHz
D = 80 MHz
E = 112 MHz
Cc, dd Indicating the Channel
Number in the Block
T Indicating the filter type Filter Type {N/A}
N = Standard Filter
A = Adjacent Channel Filter
t TX low / TX high indication L – TX Low
H – TX high
The following are some examples of specific IP-20C-HP OCU marketing models based on the syntax specified
above.
Table 8: IP-20C-HP OCU Marketing Model Example
Marketing Model Example Explanation
FXDH6H-340FA02A-310AB04N-H Channel Filters cover for IP-20C-HP, Upper 6 GHz with 1st Filters block
TRS block 340F, 28 MHz channels number 02 Adjacent and 2nd Filters
block TRS block 310A, 40 MHz channels number 04 Narrow, High