www .cellarcool .com | Page 23
CM9000 Twin-S
WALL MOUNT BRACKET INSTALLATION
1 . Place the bracket on the wall . Use a level to ensure that the bracket is level . Using a pencil, mark the four screw
holes in the rear of the bracket .
REMOTE DISPLAY: INSTALLATION AND CONFIGURATION
NOTE: Cut hole in the location shown for routing the display cable .
Tools needed: 5/16” drill bit, 3/16” drill bit, drywall saw, level, pencil
What’s included: Display panel, wall mount bracket, flush mount bracket, flush mount template
55
°
F
Display panel
Wall mount bracket
Flush mount bracket
TOP
Flush mount template