CE+T Power TSI Bravo, Руководство пользователя

Страница: 32 / 51

10. Interface
10.1 Inverter module
=
~
=
=
=
~
AC out
DC in
AC in
Inverter Status Output Power Status
Inverter Status lED Description Remedial action
off no input power or forced stop Check environment
permanent green operation
Blinking green
Converter ok but working conditions are
not fulfilled to operate properly
Blinking green/orange alternatively
Recovery mode after boost
(10 In short circuit condition)
permanent orange Starting mode
Blinking orange modules cannot start Check T2S
Blinking red Recoverable fault
permanent red non recoverable fault Send module back for repair
output power (redundancy not counted)
<5%
5% to
40%
40 to
70%
80 to
95%
100%
100% =
overload
output power (redundancy not counted)
× × ×
Status output power lED × ×
×
1B 1p 2p 2p 3p 3B Behavior (B = blinking – p permanent )
10.2 T2S
„ „
Alarm indication on T2S (urgent / non urgent / Configurable)
- green:
no alarm
- Red: Alarm
- flashing Exchanging information with inverters (only Configurable alarm)
„ „ outgoing alarm relay delay
- urgent
60 seconds delay
- non urgent 30 second delay
„ „ parameter setting via laptop or Copy/paste.
„ „ factory default according to list of set values, see Table of set values
major Alarm
minor Alarm
user selectable Alamr
uSB port
32 – TSI Bravo – user manual – v7.0