manualshive.com logo in svg

CE+T Power TSI Bravo, Руководство пользователя

Поделиться
Скачать
CE+T Power TSI Bravo Скачать руководство пользователя страница 22

9. Installation of cabinet (A la Carte)

9.1  unpacking the system

The cabinet is packed in a wooden box.

The packing material of the TSI system is recyclable.

Transport the cabinet in the box on the pallet.

9.2  Raising the cabinet

The top cover fixing bolts must noT be replaced with lifting eye bolts. mark and remove modules from the cabinet, that the 
modules can be replaced in the same slot, and raise the cabinet on location.

9.3  fixing the cabinet to the floor

The cabinet is fixed through the base of the cabinet.

Remove lowest front cover to gain access to the fixing holes.

max screw diameter is 22mm. See hole pattern, foot print. for foot print measurements.

9.4  Electrical installation

„

„

All cables shall be halogen free and rated min 90 deg C. 

„

„

Wire all positions for future expansion

„

„

Input AC / output AC / Input DC / Signal cables shall be separated

„

„

Cable crossings shall be done in 90 deg angles

„

„

Empty inverter positions shall be covered with blanks

22 

– TSI Bravo – user manual – v7.0

Содержание TSI Bravo




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды