.
Sound Indications
.
-
During Intrusion the Siren sounds to its maximum power
-
Whenever the system fails to get ARMED for any reason, the Siren sounds for a very short time with a long
gap in between. This continues until DISARMED.
-
Whenever a Sensor registered in TRAITOR mode is open, the speaker of the system would emit a low beep
-
In case of Main System battery low, the speaker of the system would emit a low beep. This would also
happen if battery of any of the compatible Sensor gets low.
.
Display explanations
.
Normal Standby mode
Display =
Where, HH:MM:SS = Current time in 24 hrs format (HH= Hours, MM= Minutes, SS= Seconds)
DAY = Today’s day i.e., Mon, Tues, Wed, etc
Srn = It shows that the system is programmed to sound the Siren in case of Intrusion.
If this “Srn” symbol doesn’t appear then it means the system is not programmed to sound the
siren.
DD/MM/YY = Current day (DD= Date, MM= Month, YY= Year)
DDDDDD = Armed
– means system is Armed
= Disarm
– means system is Disarmed
= ByPass
– means system is Armed in By Pass Mode
While Arming the system
Display =
Where, W:X = Wired Zone numbers 1 to 8 in which Sensor is open.
WL:AA,BB,CC,DD = Wireless Sensor numbers from 01 to 75 that are Open.
During Intrusion
Display =
ZZZZ = WL
:
01 to WL
:
98 in case of intrusion from wireless sensor
W1 to W8 in case of intrusion from wired sensor
TYPE = PAN, PIR, MS, VBR, Gas, SMK or Misc in case of intrusion from wired sensor
= “Remote” in case Panic key is pressed from the Wireless Remote
= “Keypad” in case Panic key is pressed from the main unit.
Intrus = It means Intrusion
TTTTTTTTTT = The Telephone number being dialed by the system
When battery goes low of any of the wireless Magnetic / Vibration sensor
Where, X= 1-9 (Total number of Sensors that are having low battery)
YYY= Type of Wireless Sensor (PAN, PIR, MS, VBR, Gas,
SMK or Misc)
CC= 01 to 75 Wireless Magnetic / Vibration Sensor number
When a Sensor is Open in DISARMED mode
Display =
Where, W:X = Wired Zone numbers 1 to 8 in which Sensor is open.
WL:AA,BB,CC,DD = Wireless Sensor numbers from 01 to 75 that are Open.
Note:
During this display the back light is kept off (in order to save battery, in case AC mains is not available).
To
view the display with back light, press # key.
.
Always ARMED Sensors
.
Any Sensor whether Wireless or Wired can be made to function 24 hours i.e., it would trigger intrusion in ARMED
mode as well as DISARMED mode.
Programming
:
:
In case of Wireless Sensor,
make its MODE = Always ARMED as explained under the heading “Wireless
Sensor
– Operating Mode”.
:
In case of wired sensor, its Zone is to be programmed as MODE = Always ARMED as explained under the
HH:MM:SS DAY Srn
DD/MM/YY DDDDDD
SNSR OPEN W
:
X,Y,
WL
:
AA,BB,CC,DD,
ZZZZ TYPE Intrus
TTTTTTTTTT
X Sensr Batt low
Type: YYYY WL:CC
SNSR OPEN W
:
X,Y,
WL
:
AA,BB,CC,DD,
