28
(17) Select the COM port that connects the PC to the keyboard.
(18) Go to “File” >> “Open”, and use the file directory to select and open the “xxxxxxx.TSK”
upgrade file.
(19) Then click “WRITE” to start the programming process.
(20) After completing the download, turn off the keyboard.
Check the MCU and firmware version:
(21) Check the checksum shown on the utility program.
(22) Press and hold the <
CAMERA MENU
> key and turn on the keyboard to check the MCU
version.
(23) Press and hold the <
RUN SEQ
> key and turn on the keyboard to check the firmware version.
(24) Power up the keyboard again, and make the necessary system settings (<
SYS
> key).
