18
For detailed instructions on setting auto-pan lines, refer to the PTZ camera user
manual.
6.6 Cruise
In Camera Control mode, the user can control the built-in cruise function on the
ZC-PT2XX series. Follow the instructions below to manipulate this function.
NOTE:
If the camera uses Ganz-S protocol, the user is only allowed to
pan/tilt the camera when setting Cruise line.
■
Setting Cruise Function
Press <
CAMERA MENU
> to enter the OSD setup menu and set up the cruise
line as described in the camera operating instructions.
■
Execute Cruise Function
Press the <
CRUISE
> key on the keyboard to execute the cruise function.
xxx Ganz PT Camera
Running Cruise…
6.7
Camera Lens Control
In Camera Control mode, the user can control the camera lens functions. The
function of the lens control keys is described below.
•
Iris Function
<
+
>: Press to open the iris.
<
-
>: Press to close the iris.
NOTE:
This Iris adjustment is not available for ZC-S series camera.
•
Zoom Function
<
Tele
>: Press to zoom the lens in.
<
Wide
>: Press to zoom the lens out.
•
Focus Function
Press the focus keys to adjust the focus of the lens in manual focus mode.
