16
6.3 Preset
Function
In Camera Control mode, the user can operate the preset function. Follow the
instructions below to set and execute preset points.
xxx Ganz PT Camera
___
■
Set Preset Point
Press a number key, e.g. <
2
>, for a view area, and then press <
SET PRESET
> to
enter this position as preset point 2.
xxx Ganz PT Camera
Set Preset 002 . . .___
■
Go To Preset Point
Press a number key, e.g. <
2
>, and then press <
GO PRESET
> to move to the
defined preset position.
xxx Ganz PT Camera
Go Preset 002 . . .___
6.4 Sequence
Function
In Camera Control mode, the user can operate the sequence function. Up to eight
sequence lines can be programmed into the ZC-PT2XX using the OSD menu, and
the first four sequence lines can be executed directly via the keyboard. Follow the
instructions below to manipulate this function.
■
Setting Sequence Line
Press <
CAMERA MENU
> to enter the OSD setup menu and set up the sequence
lines as described in the camera operating instructions. The sequence setup
menu for the PTZ camera is as shown below.
For more details refer to the GANZ ZC-PT2XX series camera manuals.
SEQUENCE
SEQUENCE LINE
1
SEQUENCE POINT
01
PRESET POSITION
001
SPEED
1
DWELL TIME
001
RUN SEQUENCE
ENTER
EXIT
YES
