13
5.7
Camera Setting
This option allows the user to assign an appropriate individual protocol to the
keyboard for each camera. Press <
1
> to start protocol assignment. Press the
◄
or
►
keys to change the setting and the
▲
or
▼
keys to select a camera. Press
<
ESC
> when finished. The available protocols are Ganz-S, Ganz-PT, Pelco-D,
Pelco-P and Chiper.
1.7 Camera Setting
Please Press 1
1.7.1 Camera ID #001
Pelco-P [GANZ-PT]
►
Protocol
Baud Rate
Ganz-S
4800, 9600, 19200 and 38400 bps (in keyboard system setting)
Ganz-PT 9600
bps
Pelco-D 2400
bps
Pelco-P 4800
bps
Chiper
For receiver box, baud rate 9600 bps
NOTE:
Ganz-PT is for ZC-PT series PTZ camera. Ganz-S is for ZC-S series
PTZ camera.
5.8
Key Press Beep
This option enables the user to turn the key beep on and off. If the setting is ON, the
key beeps when pressed. Press the
◄
or
►
key to change the setting.
1.8 Key Press Beep
[OFF] ON
5.9 Alarm
Response
The control keyboard can be programmed to execute the following actions if the
control keyboard receives alarm signals from a PTZ camera.
•
Buzzer
beep
•
Link to the PTZ camera that broadcast this alarm message
•
Switch the video channel to full screen from multiplexer
This option is used to enable or disable the keyboard's alarm response function.
The default is OFF. Press the
◄
or
►
key to change the setting.
1.9 Alarm Response
[OFF] ON
