24
Appendix B: Function Tree
■
PTZ Camera Control
Function
Operation
Description
Camera selection
+ <1> ~ <223>
Press number key to select a PTZ camera to
control it.
Pan/tilt Joystick
Right/left for pan, up/down for tilt
Lens control
<Zoom Wide>
Zoom out
<Zoom
Tele>
Zoom
in
<Focus Near>
Focus near
<Focus Far>
Focus far
<Auto / Focus>
Auto focus
Set preset
<1> ~ <256> + <Set Preset> Record preset point
Call preset
<1> ~ <256> + <Go Preset>
Recall preset point
Sequence
<1> ~ <4> + <Run SEQ>
Execute sequence
Auto-pan
<1> + <AUTO PAN>
Execute auto-pan
Cruise
<CRUISE>
Execute the cruise set in OSD menu.
OSD open
<Camera Menu>
Press this key for 3 seconds to open OSD
on camera.
■
DVR/Multiplexer Control
Function
Operation
Description
DVR/multiplexer
selection
<1> ~ <14> + <ENTER>
DVR/multiplexer selection
Split screen display
<DISPLAY>
Toggles between 1,4,9,16,6,8,7
Defined screen mode <USER>
Enter user-defined screen display mode
SPOT monitor control <SPOT>
Allows control of SPOT monitor
Enter MUX/DVR OSD <MENU>
Enter MUX/DVR OSD setup menu for
detailed configuration.
Search files
<SEARCH>
Search files by specific date, time and event.
Playback
<PLAY> key
Playback recorded image files
Reverse playback
<R.PLAY> key
Reverse playback of image files
Fast forward
<FF>
Fast forward playback and speed
adjustment
Rewind
<RW>
Rewind playback and speed down
adjustment
FF from pause
Jog preview
Fast forward playback from pause
RW from pause
Jog next
Rewind playback from pause
Stop playback
<STOP>
Stop playback
Pause playback
<PAUSE>
Pause playback, press play again to restart
Zoom in
<FULL ZOOM>
2,3,4 x zoom
Multi-split playback
<PANORAMA>
View playback image in multi-split screen
Picture in picture
<PIP>
View live and playback on same screen
Auto Sequence
<AUTO SEQ>
Execute the defined sequence of monitor
displays
Zoom: Wide/Tele Camera lens manual zoom adjustment
Focus: Near/Far Camera lens manual focus adjustment
<PTZ>
Auto focus
Camera lens auto focus
Preset: 1 ~ 32
Set and go to preset position
PTZ camera control
<RUN SEQ>
Execute the first sequence line set in the
camera OSD
