CatGenie A.I., Руководство по эксплуатации

Страница: 9 / 28

www.catgenie.com 1-888-735-3927 9
DO-IT-YOURSELF SETUP GUIDES
3. 3.
5.
FITTING TWO HOSES INTO ONE LAUNDRY DRAIN:
1.
If the Drain Hose and Washer hose won’t fit
easily into the drain, remove both hoses. Put
the CatGenie Drain Hose in first, then add the
Washer drain hose.
2.
If the Washer drain hose has a guard, hold
the guard and hose tightly together and push
Washer drain hose into the drain.
3.
If the Washer hose with its guard still won’t
go into the drain, move the Washer guard up
the hose about 2 inches. Then put the Washer
hose into the drain.
4.
Another option is to put the hoses in together
with the CatGenie Drain Hose a little ahead of
the edge of the Washer hose.
5.
Push both hoses in until they are firmly
secured inside the drainpipe.
1.
3. 4.
COILING THE DRAIN HOSE
YES.
Best NOT to coil. If you need to coil, make
wide, unkinked coils to store the Drain Hose under
the Base, at least one but no more than two times
around the peg. Run the hose through the notches
in the back of the Base.
NO.
Do not make tight coils or kinks in the Drain
Hose. Do not pinch or squeeze hose.
YES
RIGHT & WRONG SETUPS:
DO-IT-YOURSELF SETUP GUIDES
2. 3.
4. 5.
YES
NO
YES
NO
YES
NO
FLOOR DRAIN
YES.
Run Drain Hose out and
up 12” high, then down along
floor to drain. Level CatGenie if
floor slopes to drain.
NO.
Do not run Drain Hose
down on the floor directly to the
drain.
LAUNDRY DRAIN
YES.
Run Drain Hose
along floor for about 2’,
and then up to the laundry
drain pipe.
NO.
Do not run the Drain
Hose straight up to the
laundry drainpipe.