www.catgenie.com
1-888-735-3927
10
SUPPLIES
WASHABLE GRANULES
While the Washable Granules never need changing, they do need to be
replenished. Just add Granules when the amount falls below the fill-level line,
which is indicated by an indentation inside the Bowl. It is important to keep the
Granules filled to that level. Always have an extra box of Washable Granules
on hand.
Do not fill past the fill-level line.
FILL TO THIS LINE
WARNING:
Never, under ANY circumstances use cat litter in your
CatGenie. Doing so will cause severe damage to your CatGenie
and will void your Warranty. Always make sure you are using
CatGenie Washable Granules.
SANISOLUTION
SaniSolution is safe and non-toxic for cats and
humans when properly used in the CatGenie.
Ingredients are similar to cleaners used by
veterinarians to clean exam and operating areas.
The SaniSolution Cartridge is the key to
CatGenie operation and cat protection.
The CatGenie will alert you via the App and
SaniSolution Level Indicator on the Control Panel
when your CatGenie is running low or needs a new
cartridge. The CatGenie App will also indicate the
exact number of washes left on your SaniSolution
Cartridge.
SANISOLUTION LEVEL INDICATOR
The Level Indicator on your Control Panel will display your
Cartridge level at all times. Five levels are used to give you
an estimated reading:
Solid, Full Drop: All 3 LEDS Lit
Indicates your SaniSolution Cartridge has
from 120/120 to 81/120 washes remaining.
Medium Level: 2 LEDS Lit
Indicates your SaniSolution Cartridge has
from 80/120 to 41/120 washes remaining.
Low: 1 LED Lit
Indicates your SaniSolution Cartridge has
from 40/120 to 21/120 remaining.
Very Low: 1 LED + Blinking
Indicates your SaniSolution Cartridge has
from 20/120 to 1/120 washes remaining. The
CatGenie will verbally tell you the Cartridge
is low.
If you do not have a Cartridge on
hand, order a new one now.
Empty Cartridge: All 3 LEDS +
Blinking
The SaniSolution Indicator will be blinking
and the CatGenie will notify you that the
Cartridge is empty if any button is pressed
on the Control Panel. You will not be able to
run a cycle if your Cartridge is empty.
Missing Cartridge:
The SaniSolution Indicator will blink along with the
Red Error LED and the CatGenie will notify you of
the missing Cartridge if any button is pressed on the
Control Panel.
When Cartridge is missing or empty, the CatGenie
will not run a cycle. To dismiss the warning, insert
a SaniSolution Cartridge.
WARNING:
NEVER remove the Cartridge
while CatGenie is cleaning. Unit will stop.
DO NOT REMOVE WHITE NIPPLE
on bottom of the cartridge. Solution
leaks out and ruins the Processing Unit.
DOING SO VOIDS YOUR
WARRANTY
. Always store Cartridges with the bottom facing up.
DO NOT REMOVE
NEVER MIX OR
USE CAT LITTER
