www.catgenie.com
1-888-735-3927
18
TAKING APART YOUR CATGENIE TO CLEAN
IMPORTANT: UNPLUG YOUR UNIT AND TURN OFF THE WATER
SUPPLY BEFORE PROCEEDING.
1.
Move the CatGenie away from the wall. Keep the Drain Hose in the toilet or drainpipe. Take off the
Hopper Cover. Remove the Processing Unit and place it upright on a towel on the floor.
2.
Unclip the GenieHand. Retract the Arm and Clip all the way back into the opening in the brim.
WARNING:
Unless the
manual instructs
otherwise,
always unplug
the Genie Power
Cord before you
work on your
CatGenie. Be
sure to plug it
back in when
you’re finished.
1.
2.
3.
4.
5.
PULL
UP
3.
To remove the Brim, push on the Black Button for leverage as you pull up the back of the Brim.
Lift the Brim off the Base from back to front and set aside.
4.
Remove the Hopper from the base by carefully pulling it straight up. The Hopper opens like a
book to access for cleaning.
5.
To get to the Base, remove the Bowl of Granules. Set aside where cats can’t use.
IMPORTANT:
Make sure the arm clip is fully pushed back to prevent bending the
Make sure the arm clip is fully pushed back to prevent bending the
arm during brim removal.
arm during brim removal.
OPENS
LIKE A
BOOK
5.
Use both
Use both
hands
hands
