www.catgenie.com
1-888-735-3927
25
If the CatGenie does not drain after running a Drainage
Test, see page 24 for instructions to fix a Drainage Issue, or
call Customer Support at 1-888-735-3927.
TESTING MENU: DRAINAGE TEST INSTRUCTIONS
1. Getting Into The Testing Menu:
• Using two fingers, press and hold both Start and Auto
buttons at the same time. Hold until you hear the unit start
to talk.
• Press the Auto button 5x to toggle through options until
you hear “Testing Menu.”
• Press Start when CatGenie says “Testing Menu."
2. Start the Drain Test:
• Once in the Testing Menu, press Auto button 4x to toggle
through options until you hear “Water Drainage Test.”
• Press Start to run Drainage Test.
• Listen for the sound to hear if water is draining properly.
If the CatGenie does not drain, see page 24 for
instructions to fix a Drainage Issue, or call
Customer Support at 1-888-735-3927.
• Press Start to stop the test.
3. To Exit the Testing Menu and Run a Finishing Cycle:
• Press Auto button 3x.
• Press Start button to go back to Settings Menu.
• Press Start again to exit and run a Finishing Cycle.
ALWAYS run a Finishing Cycle after running a Drainage Test.
