Castolin Eutectic totalarc2 3000, Руководство по эксплуатации, Страница: 36 / 161

36
Fig.5 Rear view of power source TotalArc² 3000
Fig.3 Front view of power source TotalArc² 3000
Fig.4 Side view of power source TotalArc² 3000
Power source TotalArc² 3000
Controls and connections
Central torch connector ... for connecting up the welding
torch
- Current socket with bayonet latch ... for
- connecting the earth cable in MIG/MAG welding
- current connection for TIG welding torch
- connecting hand-held electrodes or the earth cable in
manual electrode welding (depending on the type of
electrode being used)
- Current socket with bayonet latch ... for
- connecting the earth cable in TIG welding
- connecting hand-held electrodes or the earth cable in
manual electrode welding (depending on the type of
electrode being used)
Torch control connection socket ... for connecting the
torch control plug
Remote control connection socket ... standardised con-
nection socket
Blanking cover
Mains switch ... for switching the power source on and off
Shielding gas connection socket
Mains cable with strain-relief device
Gas-test button / wire-inching button
- gas-test ...for setting the required gas-flow rate on the
pressure regulator. After you press up and hold this
button, gas will flow out.
- wire-inching ... for feeding the wire electrode into the torch
hosepack with no flow of gas or current.
Wire-spool holder with braking device ... for holding
standardised welding-wire spools weighing up to 16 kg
4-roller drive
Screw cap / filler neck for coolant
Coolant inspection window
Fuse for coolant pump
Motor-shaft lead-through of the coolant pump
Plug-type connection for water forward flow (black)
Plug-type connection for water return flow (red)
Tank draining hose (inside housing)... for emptying the
coolant reservoir