EQ400I
ENGLISH
1. GENERAL INFORMATION
This card is fitted with an on board 16A inverter to manage a 230/400 VAC three-phase motor.
The inverter allows the setting of the acceleration and deceleration ramps of the motor, the maximum torque limit and
the frequency modification (motor speed).
If an obstacle is encountered the card detects an anomalous motor absorption, stops and inverts it.
A micro-processor manages the operating logic.
The card is powered by 220 VAC single phase and therefore allows the use of three-phase motors in a domestic
environment.
2. MAIN FEATURES
•
Command and control of an automated access with N°1 230VAC three-phase motor (max 1.5 KW).
•
Built in safety edge and photocell self-test functions.
•
Settable motor speed and torque (action on voltage and frequency).
•
Settable starting boost (thrust)
•
Personalised partial opening (pedestrian).
•
Stop time adjustable from 0 to 60 seconds with trimmer.
•
Personalised slow-downs.
•
Personalised acceleration and deceleration ramps.
•
Personalised amperometric (obstacle) adjustment.
•
Built in cycle counter can be zeroed by maintenance technician.
•
Obstacle check reaction time can be set between 0.01 and 3.0 seconds.
•
Electronic protection against short circuits between the phases.
•
Complies with European Reference directive: R&TTE 99/05/CE.
3. TECHNICAL FEATURES
Control unit power supply:
230 VAC single phase.
Motor output:
230/400 VAC max 1.5 KW.
Motor current:
Max 10 Ampere protected by fuse.
Accessories power supply
24 VDC - 250 mA protected by fuse.
Working temp.:
-20°C / + 55 °C
Inverter PWM frequency
Up to 20 KHz (settable)
Fuse F1 10A motor
Fuse F2 3,15 power in
Fuse F3 500 mA power supply transformer
Fuse F4 500 mA services power
Pagina 2 di 9 Rev. 00 del 30/11/2009
