94
Operations while Multiple Computers are Connected to
the Data Projector over a Wireless LAN
While multiple computers are connected to the Data Projector over a wireless LAN, you
can check which computer’s screen contents currently are being projected, and you can
switch projection between computer screens as required. Use the Data Projector’s remote
controller to perform these operations.
To check which computer’s screen contents currently are being projected.
On the Data Projector’s remote controller, press the [
U
] key. This will display the user
name of the computer whose screen contents are currently being projected.
To switch projection from the screen contents of one computer to another
1
While the screen contents of one of the computer’s connected over a wireless
LAN connection are being projected, press the [
] key on the Data Projector’s
remote controller.
z
This will switch to the user menu that shows thumbnails of the screen contents of all the
connected computers along with their user names, as shown below.
2
Use the cursor keys on the Data Projector’s remote controller to move the
highlighting to the thumbnail you want to select.
3
Press the [ENTER] key or the [
] key.
z
This will cause the contents of the selected computer screen to be projected so they fill
the entire projection area.
