91
This section explains operations you can perform after a connection is established between
the Data Projector and computer.
Operations while a Single Computer is Connected to the
Data Projector over a Wireless LAN
To project computer screen contents
On the computer screen, click the
button on the Wireless Connection window.
• An image of the computer screen contents will be projected automatically, immediately
after a connection using Simple Connection is established. This means you do not have
to click the
button to project the image.
• This will send the contents of the computer screen to the Data Projector, which will
project it. The color of the
button at this time will change from black to green.
Using Wireless LAN for Projection
For this type of connection:
Refer to this section of this manual:
Single computer connected to the Data
Projector over a wireless LAN
“Operations while a Single Computer is Connected to the
Data Projector over a Wireless LAN” (below)
Multiple computers connected to the
Data Projector at the same time over
a wireless LAN
“Operations while a Single Computer is Connected to the
Data Projector over a Wireless LAN” (below) and
“Operations while Multiple Computers are Connected to the
Data Projector over a Wireless LAN” (page 94)