CASE CONSTRUCTION CX75C SR, Руководство оператора

Страница: 67 / 256

3 - CONTROLS/INSTRUMENTS
NOTE: If they are still selected when the engine is
stopped, they will remain active when the engine is
restarted.
7. Menu screen display switch
Press this switch to display the menu screen.
The menu contains the following items.
Language
Brightness (day)
Brightness (night)
Fuel consumption indicator
Maintenance information
Clock adjust
Auxiliary hydraulics
Camera setting
Use the switch shown in the diagram to select or a
change a menu item.
SMIL13CEX2601AA
2
Refer to page 3-20 .
8. Camera display switch
Press this button to switch between the machine
information screen, machine infor camera
joint display, and camera image independent display
(mode, travel mode, clock and warning only).
• Mode 1: Normal screen
SMIL13CEX2602AA
3
Machine information screen
• Mode 2: Camera screen
SMIL13CEX2603AA
4
Machine information plus camera joint display
• Mode 3: Camera screen without indicators
SMIL13CEX2604AA
5
Camera image independent display (mode, travel
mode, clock and warning only)
The 3 types above are available for selection.
9. Hour meter select/back monitor select switch
In the information screen, hour meter select is en-
abled.
"Trip" control (partial hour meter)
Used to calculate a specific operation time.
Press the control to set the hour meter display to 0 and
display the "Trip" message.
Release the control.
After about 1 min., the "Trip" display disappears and
the normal hour meter display returns.
To view the specific operation time, press the control
and release it immediately.
To cancel the specific operation time, press and hold
the control for about 2 sec.
The specific time display returns to 0.
NOTE: If the key is switched “Off” , the hour meter
goes out. If the hour meter button is pressed after
the key is switched
“Off” , only the hour meter will be
displayed for 20 s .
NOTE: When a camera image is displayed, the cam-
era image is switched each time the camera select
switch is pressed.
3-19