6 - MAINTENANCE
Changing a battery
WARNING
Electrical shock hazard!
Do not reverse battery terminals. Connect positive cable ends to positive terminals (+) and negative
cable ends to negative terminals (-).
Failure to comply could result in death or serious injury.
W0262A
WARNING
Hazard to bystanders!
Always store batteries in a safe location. Keep out of reach of children and other unauthorized per-
sons.
Failure to comply could result in death or serious injury.
W0224A
WARNING
Battery acid causes burns. Batteries contain sulfuric acid.
Battery electrolyte contains sulfuric acid. Contact with skin and eyes could result in severe irritation
and burns. Always wear splash-proof goggles and protective clothing (gloves and aprons). Wash
hands after handling.
Failure to comply could result in death or serious injury.
W0120A
To replace the battery, proceed as follows:
1.
Place the key of the battery master switch in
O
(off) position. Refer to page
3-47
.
2.
Remove the terminal protection caps, discon-
nect cables (negative terminals) and then ca-
bles (positive terminals). Remove the anti-sul-
phate pellets and the battery clips.
3.
Install a new battery, put back its clips.
4.
Clean the cables and battery terminals and
coat them with grease.
5.
Install new anti-sulphate pellets, reconnect
positive cable ends to positive terminals and
then negative cable ends to negative termi-
nals. Install the terminal protection caps.
6.
Place the key of the battery master switch in
“I”
(on) position.
7.
Install the skid plate.
SMIL13CEX2773AB
4
6-39
Содержание CX75C SR
