![CASE CONSTRUCTION CX75C SR Скачать руководство пользователя страница 164](http://html1.mh-extra.com/html/case-construction/cx75c-sr/cx75c-sr_operators-manual_2567478164.webp)
6 - MAINTENANCE
Engine coolant level
WARNING
Hazardous chemicals!
Coolant can be toxic. Avoid contact with
skin, eyes, and clothing. Antidotes:
EXTERNAL - Rinse thoroughly with water.
Remove soiled clothing.
INTERNAL - Rinse the mouth with water.
DO NOT induce vomiting. Seek immedi-
ate medical attention.
EYES - Flush with water. Seek immediate
medical attention.
Failure to comply could result in death or
serious injury.
W0282A
To check the engine coolant level proceed as follows:
•
On flat, level ground, before using the ma-
chine (while the engine is still cold), the level
in the expansion reservoir should be between
the
“FULL” (1)
and
“LOW” (2)
marks.
•
If the coolant is not in range, fill with coolant to
the specified amount the expansion reservoir,
then close the expansion reservoir cap.
SMIL13CEX2783AB
1
Fuel tank
WARNING
Fire hazard!
When handling diesel fuel, observe the
following precautions:
1. Do not smoke.
2. Never fill the tank when the engine is
running.
3. Wipe up spilled fuel immediately.
Failure to comply could result in death or
serious injury.
W0099A
To drain the sediments and water from the fuel tank
proceed as follows:
1.
Place a receptacle of a suitable capacity under
the drain plug.
2.
Open the drain valve located at the bottom of
the tank and drain the accumulated sediment
and water.
3.
After draining, close the drain valve.
SMIL13CEX2787AB
1
6-18
Содержание CX75C SR
