manualshive.com logo in svg

Cary Audio Design HD Surround Sound Processor Cinema 11a, Руководство пользователя

Поделиться
Скачать
Cary Audio Design HD Surround Sound Processor Cinema 11a Скачать руководство пользователя страница 46

SETUP MENU 

 

 

45

SET HDMI IN AUDIO: 

 

To set HDMI IN audio: 

 

1.

 

Press the SETUP button on the remote to enter the “SETUP MENU”.                                                     

The “SETUP MENU / LISTENING PROFILES” menu appears on the front panel display. 

 
2.

 

Press the 

 button on the remote unit you reach “INPUTS” on the front panel display.                                   

The “SETUP MENU / INPUTS” menu appears on the front panel display. 

 

3.

 

Press the ENTER button on the remote to enter the “INPUTS” setup menu. 

        The “INPUTS / Assigned Inputs” menu appears on the front panel display. 

 

4.

 

Press the 

 

button on the remote until you reach the “SET HDMI IN AUDIO” menu. 

        The “INPUTS / Set HDMI in audio” menu appears on the front panel display. 

 

5.

 

Press the ENTER button on the remote to enter the “SET HDMI IN AUDIO” setup menu.     

        The “Set HDMI in audio / HDMI 1…..Bitstream” menu appears on the front panel display. 

 

6.

 

Use the 

and

buttons on the remote to select the HDMI input audio format.                                              

You can select either “Bitstream” or “LPCM” for the HDMI input audio format. 

 

7.

 

Press the 

button on the remote when you have made a selection to move to HDMI input 

2. Repeat step 6 for HDMI input 2. 

 

8.

 

Press the 

button on the remote to 

select BACK and press the ENTER button 
to the Set HDMI in audio menu, or press 

the SETUP button to exit the SETUP 

MENU.  

                   

 

LISTENING TO THE RADIO 

 

The following steps show you how to tune in to 

HDFM, HDAM, FM and AM radio broadcasts 

using the automatic (search) and manual (step) 

tuning functions. 

 
 

1.

 

Press the HDFM, HDAM, AM or FM button 

on the remote handset or front panel to 

select the band. 

 

2.

 

Tune the radio tuner to a station. There 
are two ways of doing this: 

 

Automatic tuning and saving station

 

To search for stations in the currently 

selected band, press the TUNER SCAN 
button on the remote handset. The 

Cinema 11a will start searching for the 

Содержание HD Surround Sound Processor Cinema 11a




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды