MANUAL SOUND SETUP
32
SET SPEAKER CONFIGURATION
The first step in configuring the Cinema 11a to operate with your speaker system is to set the
type, number and crossover frequencies of your particular loudspeakers. You make these
selections using the SPEAKER SETUP menu shown below.
NOTE: The following selected menus appear on the Cinema 11a display:
SETUP MENU
LISTENING PROFILES
1.
Press the SETUP button to enter the SETUP menu.
The “SETUP MENU / LISTENING PROFILES” menu appears on the front panel display.
2.
Press the ENTER button on the remote to enter the “LISTENING PROFILES” setup menu.
The “LISTENING PROFILES / MOVIE MODE” appears on the front panel display.
3.
Press the ENTER button on the remote to enter the “MOVIE MODE / Set Speaker Config”
settings menu.
The “MOVIE SPK Setting / Set Speaker Config” menu appears on the front panel display.
4.
Press ENTER to enter the “Set Speaker Config” settings menu.
The “Set Speaker Config / FL .... Yes” menu appears on the front panel display.
5.
Use the
and
buttons on the remote to adjust the FL (front left) speaker
configuration to either “Yes” or “No”.
6.
Use the
and
buttons on the remote to cycle through the different speakers within
the system. The following options are available for each group of speakers:
•
For FL (Front Left) you can select Yes or No. Select No when the speaker setup
does not include front L speaker. The Cinema 11a then redirects front L channel
signals to the center output connectors.
•
For CEN (Center) you can select Yes or No. Select No when the speaker setup does
not include center speaker. The Cinema 11a then redirects center channel signals
to the front L/R output connectors.
•
For FR (Front Right) you can select Yes or No. Select No when the speaker setup
does not include front R speaker. The Cinema 11a then redirects front R channel
signals to the center output connectors.
•
For SR (Surround Right) you can select Yes or No. Select No when the speaker
setup does not include side R speaker. The Cinema 11a then redirects side R
channel signals to the front R output connectors.
•
For SBR (Surround Back Right) you can select Yes or No. Select No when the
speaker setup does not include surround rear R speaker. The Cinema 11a then
redirects surround rear R channel signals to the side R output connectors.
•
For SBL (Surround Back Left) you can select Yes or No. Select No when the
speaker setup does not include surround rear L speaker. The Cinema 11a then
redirects surround rear L channel signals to the side L output connectors.
•
For SL (Surround Left) you can select Yes or No. Select No when the speaker setup
does not include side L speaker. The Cinema 11a then redirects side L channel
signals to the front L output connectors.
•
For SW (Subwoofer) you can select Yes or No. Select No when the speaker setup
does not include SW speaker. The Cinema 11a then redirects SW channel signals
