Cary Audio Design HD Surround Sound Processor Cinema 11a Скачать руководство пользователя страница 20

Страница: 20 / 59

CONTROLS AND DISPLAYS

REAR PANEL

LEFT

RIGHT

ANALOG AUDIO INPUT

ANALOG 7.1 INPUT

7.1 PREAMPLIFIER OUTPUT

RS 232

IR INPUT ZONE

TRIGGERS

ZONE 2
AUDIO
OUT

CEN

SBL

SBR

CEN

SBL

SBR

AC POWER
[ ] 117V 50/60 Hz
[ ] 220V 50/60 Hz

Cinema 11a Surround Sound Processor

CARY AUDIO DESIGN

DIGITAL INPUT

AUTO
SETUP
MIC- IN

FM
75

AM LOOP

ANTENNA

ZONE 2
DIGITAL
OUT

CEN

HDMI 1 INPUT

HDMI 2 INPUT

HDMI OUTPUT

ANALOG AUDIO IN (INPUT 1) XLR (L + R)

• Use these jacks for connection to balanced CD or DVD player analog audio output

connectors.

ANALOG AUDIO IN (INPUTS 2 THROUGH 8) RCA

• Use these jacks for connection to CD, DVD, TV, or VCR input options.

ANALOG AUDIO 7.1 INPUT

• By connecting a DVD audio player, SACD multi channel player, or other component that

has a multi-channel output, you can playback the analog audio with 5.1 or 7.1 channel

outputs.

ZONE ANALOG AUDIO OUT

• These jacks supply the analog stereo audio outputs to an external audio amplifier used to

power the speakers in the remote zone.

7.1 PREAMPLIFIER OUTPUTS

• Use these jacks to connect to the main zone five or seven channel power amplifiers.

7.1 PREAMPLIFIER OUTPUTS XLR

• Use these jacks to connect to the main zone five or seven channel power amplifiers.

AC INLET CONNECTOR

• Plug the power cord into this AC inlet, then into the power outlet on the wall.

DC TRIGGER OUTPUT TERMINALS

• Connect devices that need to be triggered by DC + 12V. (Screen, curtains, lights, etc.)

IR INPUT

• Use the Z1 and Z2 remote jacks to connect external IR sensors. When the unit is installed

where it is not otherwise visible to the remote, connect an optional, external sensor and

the 1 (Main) jack will be activated. The Cinema 11a should be used for connections to the

power amplifiers for the main room speaker. The device connected to the zone trigger will

only be activated when the Multi-Zone system is turned on. Connect it to the amplifier
used to power the speakers in the second zone (Zone 2).

Содержание HD Surround Sound Processor Cinema 11a




























































Результаты поиска

Содержание HD Surround Sound Processor Cinema 11a

Отзывы:

Похожие инструкции для HD Surround Sound Processor Cinema 11a

Бренды по названию

Популярные бренды

Cary Audio Design HD Surround Sound Processor Cinema 11a, Руководство пользователя

Результаты поиска

Содержание HD Surround Sound Processor Cinema 11a

Отзывы:

Похожие инструкции для HD Surround Sound Processor Cinema 11a

Бренды по названию

Популярные бренды