Carver 356 2004 Скачать руководство пользователя страница 5

Страница: 5 / 225

each system and are not drawn to scale. Do not refer-

ence these drawings to order parts or to service your

boat. Contact your authorized Carver Dealer for any

parts or service required for your boat.

The information contained in this Owner’s Guide was

complete and accurate at the time the guide was printed.

Carver reserves the right to change materials, part

numbers, specifications, or system designs at any time

without notice.

The OEM (Original Equipment Manufacturer) informa-

tion is supplied by companies from whom Carver has

purchased components to install in your boat. These

components include, but are not limited to, standard

items like the engines, sanitation system, various pumps,

and 12-volt batteries, as well as optional items like the

air conditioning system and navigation systems. The

OEM information explains how to operate and maintain

the components.

If you install an aftermarket accessory on your boat, add

the OEM information that accompanies the accessory to

the Owner's Information kit.

NOTE:

If the OEM information conflicts with this

Owner’s Guide, follow the instructions in the OEM

information.

OEM Information

REFACE

5/01

Содержание 356 2004


































































































































































































































Результаты поиска

Содержание 356 2004

Отзывы:

Carver 356 2004, Руководство пользователя, Страница: 5 / 225

Результаты поиска

Содержание 356 2004

Отзывы: