Carver 356 2004, Руководство пользователя

Страница: 188 / 225

S
ECTION
8 W
INTERIZATION AND
S
TORAGE
179
3937 3/99
2. If your boat has the optional seawater head system:
a. Close the seacock for each head.
O
PEN
C
LOSED
b. Disconnect the seawater pickup hoses from the
seacocks.
c. Flush the heads until all water is drained from
the seawater pickup hoses.
d. Reconnect the seawater pickup hoses to the
seacocks. Leave the seacocks closed.
3. Below the boat, place a large bucket beneath the
overboard discharge fitting to collect antifreeze
pumped out later in this procedure. This fitting is
located beneath a hatch below the dinette’s aft
cushion.
You must use an approved antifreeze in your boat’s
sanitation system. Refer to the SeaLand Technical
Bulletin at the end of this section for information on
the proper type of antifreeze to use. Using the wrong
type of antifreeze can damage the sanitation system.
The repair of such damage is not included under the
terms of either the Carver Limited Warranty or the
sanitation system OEM’s warranty.
4. Purchase 30 gallons of nontoxic recreational vehicle
antifreeze.
5. Locate the waste tank selector valve located be-
neath a hatch below the dinette’s aft cushion. This
valve allows you to select the forward or aft waste