Carver 356 2004 Скачать руководство пользователя страница 182

Страница: 182 / 225

ECTION

INTERIZATION

AND

TORAGE

173

3937 3/99

3. Clean the bilge as described in the

"Bilge"

portion

Section 7

Before performing this procedure on the sanitation

system, your boat should be pulled from the water.

Refer to the OEM information for more information on

winterizing the sanitation system.

There are three types of sanitation systems: the stan-

dard system, the overboard discharge system and the

direct overboard discharge system.

Standard Sanitation System

1. Empty the waste tanks as described in the

"Emp-

tying the Waste Tanks"

portion of

Section 4

Remove as much of the fresh water used in flushing

the tanks as possible.

2. If your boat has the optional seawater head system:

a. Close the seacock for each head.

Sanitation System

PEN

LOSED

b. Disconnect the seawater pickup hoses from the

seacocks.

c. Flush the heads until all water is drained from

the seawater pickup hoses.

d. Reconnect the seawater pickup hoses to the

seacocks. Leave the seacocks closed.

Содержание 356 2004


































































































































































































































Результаты поиска

Содержание 356 2004

Отзывы:

Carver 356 2004, Руководство пользователя, Страница: 182 / 225

Результаты поиска

Содержание 356 2004

Отзывы: