Wiring inputs and outputs
TruVu™ UCXP683T
-V
CARRIER CORPORATION ©2021
Installation and Start-up Guide
All rights reserved
26
4
If you are using the UO, set the universal output's DIP switch to Binary or Analog for the type of device wired
to the output.
WARNINGS
○
The universal output is set to Binary in the factory. To avoid damage to the controller, use a voltmeter to
verify there is no voltage on the UO-01 (+) and Common (
–
) terminals before setting the DIP switch to
Analog.
○
Do not apply voltage to the universal output if the DIP switch is set to Analog.
5
Connect binary and analog output wiring to the screw terminals on the TV-UCXP683T-V and to the controlled
device.
6
Connect the ground wire to the AO outputs' terminals.
Содержание TruVu UCXP683T-V
Страница 75: ......
Страница 76: ...Carrier 2021 Catalog No 11 808 850 01 12 3 2021...