Carrier TruVu UCXP683T-V, Руководство по установке и запуску

Страница: 11 / 76

To mount the TV-UCXP683T-V
TruVu™ UCXP683T -V CARRIER CORPORATION ©2021
Installation and Start-up Guide All rights reserved
7
The TV-UCXP683T-V can be mounted on a DIN rail or screwed to a surface.
DIN rail mount
1
In the trough on the back of the controller, hook the edge of the DIN rail under the controller's two mounting
flanges.
2
Push the controller toward the DIN rail until you hear it click and the spring-loaded latch secures the
controller to the DIN rail.
Screw Mount
Leave about 2 in. (5 cm) on each side of the controller for wiring.
Pull the mounting tabs until they click in place. Insert #6 screws through them. Use no more than 12 in lbs. torque
to secure plastic tab to mounting surface. Use flat washers to prevent the screw head from deforming the plastic.
A:
B:
C:
D:
E:
F:
G:
Depth:
7.78 in. (19.77 cm)
5.88 in. (14.94 cm)
5.3 in. (13.45 cm)
4.50 in. (11.43 cm)
.49 in. (1.26 cm)
1.96 in. (4.98 cm)
.41 in. (1.05 cm)
2.00 in (5.08 cm)
To mount the TV-UCXP683T-V