LonWorks Integration Guide
CARRIER CORPORATION ©2018
i-Vu® Link and Open Link
All rights reserved
1
Follow the steps in this document to integrate one or more third party LonWorks controllers using an i-Vu®
Link/Open Link. See the
i-Vu® Link/Open Link Installation and Start-up Guide
for installation and networking
instructions.
i-Vu® Link/Open Link
LonWorks port
S2
Module driver
drv_ivulink_lon_6-00-082*
drv_ivuopenlink_std_6-00-082*
Read/write capability
Can read from and write to the third-party equipment
Third party points supported
500
Third party
Supported equipment
Any device that supports the LonWorks protocol using
SNVT's**
Network media type
EIA-232 to SLTA-10 network adapter
Quantity of devices you can
physically connect to the i-Vu®
Link/Open Link
1 LonWorks network segment with up to 64 LonWorks
devices, daisy-chained
*
You can download the latest drivers from the
Carrier Control Systems Support Site
. Check the latest bulletin releases for new or updated drivers.
** UNVT's and nci SNVT's are proprietary and not supported.
The i-Vu® Link/Open Link drivers support LonWorks devices connected to Port S2 and BACnet or Modbus devices
connected on the Ethernet port simultaneously. The third party point count for the i-Vu® Link/Open Link is the
total of the 2 ports.
Overview
