Monitor and control equipment
86
i-Vu CCN Pro 4.2
Equipment Values
An
Equipment Values
report allows you to compare point information.
To create an
Equipment Values
report:
1
On the navigation tree, select the location where you want to view the report.
2
Click the
Reports
button drop-down arrow, then select
New Report
.
3
Select
Equipment Values
.
4
Type a name for the report.
5
Click
Create
.
6
On the
Design
tab, click the plus sign next to
Page
to verify or change the page size and orientation.
NOTE
Changing the size and orientation of the printed page also changes the report layout on the
View
tab.
7
Click the plus sign next to
Rows
.
8
Do one of the following:
○
On the selection tree, select the pieces of equipment you want to view in the report. (Use Ctrl+click,
Shift+click, or both to select multiple items.) Then click
Add
.
Optional: Select the
Highlight alternate rows
checkbox to make the report easier to analyze.
9
Click
Next
or the plus sign next to
Columns
.
10
Verify or change the report
Title
,
Page units
of measure for defining column widths, and
Outer border
characteristics.
11
Select a column in the report preview.
NOTE
The selected column is light purple.
12
Under
Column Header
, define how you want the column header to look.
13
Under
Column Data
, define the data you want in the column and how you want it to look. See table
below.
14
Optional: Use the
Add
,
Delete
, and arrow buttons below the report preview to manipulate the columns.
15
Click
OK
.
16
Click
Run
.
NOTE
To run this report later, go to the location where the report was created. Click the
Reports
button drop-
down arrow, select the report, then click
Run
.
Type of Column Data
Point
Displays point data in the column.
Display
Select the property to show in this column.
Data is named
differently in some
equipment
Select this checkbox if similar points have different names in
different equipment. Then add each of the names to the
Name
to use
list.
For example, if a point is named Zone Temp in one equipment
and Zone Temperature in different equipment, add both names
to the list.
Point to use
Select the name of the point to show in the column.
