Monitor and control equipment
66
i-Vu CCN Pro 4.2
five SNMP servers to receive traps.
NOTES
•
i-Vu CCN Pro supports SNMP v1.
•
Each SNMP server you want to receive these traps must have SNMP monitoring equipment installed. If
problems arise with your SNMP connection or receiving traps, contact your IS department.
•
This alarm action uses Port 162 to send SNMP traps. To use a different port, open
i-Vu CCN
Pro
x.x
\webroot\<system_name>\system.properties
in a text editor such as Notepad. In the line
#snmp.trap.port = 162
, delete
#
at the beginning of the line and change 162 to the port you want to
use. If you make this change while i-Vu CCN Pro Server is running, you must restart it to have the change
take effect.
Field
Notes
Network Address*
The network address of the SNMP server receiving the SNMP trap.
Community Name*
The community name that the SNMP server belongs to.
Comment
The physical location of the SNMP server. This field is optional.
Trap number*
If the network administrator has configured trap numbers, type a unique number
from 1 to 127.
NOTE
The same trap number is used for all messages from this alarm action.
Text to send as the SNMP
Trap
255 character limit. Type punctuation, spaces, or returns after the entries to
format the message. You can customize this text by selecting field codes from the
Append Field Code
list.
Run Conditions
By default, i-Vu CCN Pro performs an alarm action when the alarm source
generates an alarm
and
when it returns to normal. Under
Perform Action
you can
choose to:
•
Run the alarm action only when the alarm source generates an alarm
or
when
it returns to normal.
•
Wait for the specified amount of time, then run the alarm action if the alarm
has not been acknowledged or has not returned to normal. *
•
Run if the alarm occurs during the occupied hours defined for a schedule
group or run if the alarm occurs during the unoccupied hours defined for a
schedule group. *
EXAMPLE: To have i-Vu CCN Pro perform one alarm action during work hours
and a different alarm action after work hours:
1.
Create a
schedule group
(page 49), but do not assign members to it.
2.
Create a schedule for the group. Set the occupied hours to be the same as
the work hours.
3.
Create the alarm action that you want i-Vu CCN Pro to perform during work
hours. Under
Run Conditions
, select
Run if schedule group <your new
group> is Occupied
.
Create the alarm action that you want i-Vu CCN Pro to perform during after hours.
Under
Run Conditions
, select
Run if schedule group <your new group> is
Unoccupied
.
* Ask your network administrator for this information.
