Carrier Cassette Sky 53QC 36, Руководство по установке

Страница: 19 / 48

17
4 – 6 mm
INDOOR UNIT INSTALLATION (Cont.)
13.2 INSTALLATION OF FRONT PANEL
CAUTION
Never put the front panel face down on floor or against the wall, or on bulgy objects.
Never crash or strike the front panel.
1) Remove the return air grill.
‰ Slide two grill switches toward the
middle at the same time, and then pull
them up.
‰ Draw the grill up to an angle of about
45
° , and remove it.
2) Remove the installation covers at
the four corners
‰ Wrench off the bolts, loose the rope of
the installation covers, and remove
them.
3) Install the front panel
‰ Align the swing motor on the panel to
the tubing joints of the body properly.
‰ Fix hooks of the panel at swing motor
and its opposite sides to the hooks of
corresponding water receiver
( item 1 on figure ).
‰ Then hang the other two panel hooks
onto corresponding hangers of the body
( item 2 on figure ).
‰ Adjust the four panel hook screws to
keep the panel horizontal, and screw
them up to the ceiling evenly
( item 3 on figure ).
‰ Regulate the panel in the direction of the
arrow. Slightly to fit the panel's center to
the center of the ceiling's opening.
Guarantee that hooks of four corners are
fixed well.
‰ Keep fastening the screws under the
panel hooks, until the thickness of the
sponge between the body and the
panel's outlet has been reduced to about
4~6mm. The edge of the panel should
contact with the ceiling well.
Grille switch
Hook-bolt
Tubing
joint
Hook
panel
Outlet
joint
Swing
Motor
Cross-screwdriver
Water-
receiver
Front panel
foam 2
Fan
Air
outlet
Main body
Ceiling
Panel
Panel foam 1
Panel sponge
Outlet foam