Carrier AquaForce PUREtec 30XBEZE 200, Инструкции по установке, эксплуатации и обслуживанию

Страница: 24 / 64

24
30XBEZE from 900 to 1200
30XBEZE 900 950 1050 1150 1200
Power circuit supply
Nominal voltage V-ph-Hz 400-3-50
Voltage range V 360-440
Control circuit supply
24 V via internal transformer
Maximum operating input power
(1)
Standard unit kW
Circuit 1 (a) kW 154 163 224 245 262
Circuit 2
(a)
kW 246 262 244 260 262
Option 081 kW 399 426 468 505 524
Unit + option 15LS
Circuit 1
(a)
kW 147 157 215 236 253
Circuit 2 (a) kW 236 253 235 252 253
Option 081 kW 383 410 450 487 505
Power factor at maximum power
(1)
Standard unit
Displacement Power Factor (Cos Phi) 0,89 0,89 0,89 0,89 0,89
Unit + option 15LS
Displacement Power Factor (Cos Phi) 0,89 0,89 0,89 0,89 0,89
Nominal operating current draw
(2)
Standard unit
Circuit 1
(a)
A 174 184 250 267 292
Circuit 2 (a) A 270 292 267 288 292
Option 081 A 444 475 516 555 583
Unit + option 15LS
Circuit 1 (a) A 163 173 235 252 275
Circuit 2
(a)
A 253 275 252 273 275
Option 081 A 416 447 486 524 549
Maximum operating current draw (Un)
(1)
Standard unit
Circuit 1 (a) A 250 265 365 397 425
Circuit 2
(a)
A 400 425 397 422 425
Option 081 A 650 690 762 819 850
Unit + option 15LS
Circuit 1
(a)
A 240 255 351 383 410
Circuit 2 (a) A 384 410 383 408 410
Option 081 A 624 665 733 790 819
Maximum current (Un-10%)
(1)
Standard unit
Circuit 1
(a)
A 269 285 392 426 457
Circuit 2 (a) A 429 457 426 454 457
Option 081 A 697 741 818 879 913
Unit + option 15LS
Circuit 1 (a) A 259 275 378 412 441
Circuit 2
(a)
A 414 441 412 440 441
Option 081 A 672 716 790 851 882
Nominal start-up current
(3)
Circuit 1
(a)
A 587 587 629 629 629
Circuit 2 (a) A 629 629 629 629 629
Option 081 A 854 876 893 915 918
Option 081 & Opt 25c A 629 640 672 683 683
Maximum start-up current(Un) (2)
Circuit 1
(a)
A 587 587 629 629 629
Circuit 2 (a) A 629 629 629 629 629
Option 081 A 987 1012 1026 1051 1054
Option 081 & Opt 25c A 761 776 804 819 818
(1) Values obtained at unit continuous maximum operating conditions (data given on the unit nameplate)
(2) Operating current of the smallest compressor(s) + fan c locked rotor current or reduced start-up current of the largest compressor.
(3) Standardised EUROVENT conditions, water-cooled exchanger water inlet/outlet = 12°C/7°C, outdoor air temperature = 35°C.
(a) When the machines are equipped with two power supplies, circuit 1 supplies the refrigerant circuit A and circuit 2 supplies the refrigerant circuit B..
4 -PHYSICAL AND ELECTRICAL DATA FOR 30XB(E/P)ZE UNITS