© 2014, Carmanah Technologies Corporation. June 2014. 61249_M650H_User_Manual_RevC
M650H USER MANUAL
41
Send Settings To
Device
Click this to send the settings currently shown in the
Setting
columns to the lantern.
Note that this button becomes inactive when the
values in the
Setting
columns would require more
solar energy than is available at the programmed
location (latitude and longitude). When this occurs,
red exclamation points highlight the settings that
are contributing to the energy deficit. If you put
your mouse pointer over the exclamation point, a
message indicates the problem.
With the lantern plugged into your
computer, click the button to send the
values in the
Setting
column on the
Configuration
page to the lantern.
Get Settings
From Device
Click this to retrieve the lantern’s current settings
and copy them into the
Setting
column. Note that
when 650DM connects to a lantern, it does this
automatically.
Use the
Get Settings From Device
button if you
have modified the values in the
Setting
columns of
the
Configuration
page, but don’t want to send the
settings to the lantern.
With the lantern plugged into your
computer, click
Get Settings From
Device
to populate the
Setting
columns’
values with those programmed on the
lantern.
Restore Defaults
This restores the settings that were last programmed
. If the lantern’s settings have only been changed
at the User Access Level, the settings will return to
what they were when you first received the lantern.
With the lantern plugged into your
computer, click
Restore Defaults
to
populate the
Setting
columns’ values
with those originally programmed on the
lantern.
