EN
www.carlisleft.com
77
-
3345 R1.1 (06/2022)
52 / 62
6. Assembly instructions:
Lightly lubricate (1) the O
-
ring and guide rings and the side of the piston housing (2) then push (3) the
piston into its bottom position (4) in the cylinder block. Repeat the steps on the previous and this page,
until this point, for all the needles and pistons.
With all the needles and pistons in place, the
central body extension (5) is mounted to the
central body axis.
The central body extension is fastened to the axis
using the ring attachment (6) and three screws (7).
Use the pin (8) and corresponding hole (9) to guide
the extension to its correct position.
1
3
2
4
5
6
7
8
9
6
7
[3.3 Nm]