Carl Valentin DYNACODE II, Краткое руководство пользователя

Страница: 74 / 132

Dynacode II
74 English
Cleaning and Maintenance
DANGER!
Risk of death by electric shock!
⇒
Disconnect the direct print module from power supply before performing any maintenance work.
NOTICE!
When cleaning the label printer, personal protective equipment such as safety goggles and gloves are recommended.
Maintenance task Frequency
General cleaning. As necessary.
Cleaning transfer ribbon roller. Each time the transfer ribbon is changed or when the printout
is adversely affected.
Cleaning printhead. Each time the transfer ribbon is changed or when the printout
is adversely affected.
Replacing printhead. In case of errors in printout.
Adjusting angle. In case of an unequal use of the printhead.
NOTICE!
The handling instructions for the use of Isopropanol (IPA) must be observed. In the case of skin or eye contact,
immediately wash off the fluid thoroughly with running water. If the irritation persists, consult a doctor. Ensure good
ventilation.
General Cleaning
CAUTION!
Abrasive cleaning agents can damage the direct print module.
⇒
Do not use abrasives or solvents to clean the outer surface of the label printer.
⇒
Remove dust and paper fuzz in the printing area with a soft brush or vacuum cleaner.
⇒
Clean outer surfaces with an all-purpose cleaner.
Cleaning theTransfer Ribbon Roller
A
A soiled print roll can lead to reduced print quality and can affect
transport of material.
•
Remove transfer ribbon cassette.
•
Remove deposits with roller cleaner and a soft cloth.
•
If the roller (A) appears damaged, replace it.