Dynacode II Series
Function Menu
08.16
Operating Manual
63
9.15 Date & Time
The upper line of display shows the current date, the second line the
current time.
On:
Module automatically adjust clock for daylight saving changes.
Off:
Summertime is not automatically recognized and adjusted.
Select the format in which you want to define beginning summertime.
The above example indicates the default setting (European format).
DD
Day
WW
Week
WD
Weekday
MM
Month
YY
Year
next day
only next day is taken into consideration
By means of this function you can enter the date at which summertime
has to start. This entry refers to the previously selected format.
Example: summertime is automatically adjusted at last Sunday in
March (03).
By means of this function you can define the time when you want to
start summertime.
Select the format in which you want to define end of summertime. The
example above indicates the default setting (European format).
By means of this function you can define the date when you want to
stop summertime. The entry refers to the previously selected format.
Example: summertime is automatically adjusted at last Sunday in
October (10).
By means of this function you can define the time when you want to
stop summertime.
By means of this function you can enter time shifting in hours and
minutes (for automatically adjustment from summer and wintertime).
This entry refers to the direct print module time set currently.
Setting of
date and time
Summertime
Start of summertime
–
Format
Start of summertime
–
Date
Start of summertime
–
Time
End of summertime
–
Format
End of summertime
–
Date
End of summertime
–
Time
Time shifting
