Carl Valentin APL 100, Руководство по эксплуатации

Страница: 27 / 58

Applicator APL 100 Configuration
11/13 Operating Manual 27
5 Configuration
The label applicator can be operated in different ways. While the
original process stays the same, the operation mode can be chosen
within the function menu of the connected label printer.
The most important setting is the selection between the operating
modes 'Stamp on', 'Blow on' and 'Roll on'. Additionally the applicator
has different application modes concerning the order of printing and
applying within one labelling cycle.
Stamp on Roll on Blow on
Print-Apply   
Apply-Print
  
Waiting position up
Apply-Print

Waiting position down
5.1 Configuration Parameter
Parameter Meaning Selection
Operating mode Setting of operating mode
Default: Stamp on Stamp on, Blow on, Roll
on
Mode Setting of application mode
Default: Print-apply Print-apply
Apply-print
Support delay On Setting of switch-on delay
for supporting air
Default: 0 ms 0 ... 2500 ms
in steps of 10 ms
Support delay Off Setting of switch-off delay
for supporting air
Default: 500 ms 0 ... 2500 ms
in steps of 10 ms
Pressure control Setting of compressed-air control
Default: On On
Off
Vacuum control Setting of vacuum control
Default: On On
Off
Blow time Setting of blow time
Default: 100 ms 0 ... 2500 ms
in steps of in 10 ms
Waiting position Waiting position of pad with dispensed
label for 'Blow on + Apply-print'
Default: Up Up
Down
Roll on time Setting of roll on time
Default: 0 ms 0 ... 5000 ms
in steps of 10 ms
Cleaning time Setting of cleaning time
Default: 100 ms 0 ... 2500 ms
in steps of 10 ms
Timeout hub Moving up/down of pad
Default: 0 ms 0 ...5000 ms
in steps of 10 ms
Pressure time Setting of pressure time
Default: 100 ms 0 ...5000 ms
in steps of 10 ms