Carl Valentin APL 100, Руководство по эксплуатации

Страница: 45 / 58

Applicator APL 100 Operation
11/13 Operating Manual 45
9.3 Test Mode
Test Mode Using the Pre-dispense Key without Print Job
1
Figure 28
The whole labelling process can be simulated without the need of a
print job or a connection to a computer by pressing the key
and
the pre-dispense key (1).

Press the key .
A blank label is fed. The vacuum at the pad as well as the
supporting air (blow tube) are switched on.
After the label has been picked up by the pad, the supporting air
is switched off.

Press the pre-dispense key (1).
The pad is moved to the labelling position. A sensor signals
when the labelling position is reached. The vacuum is switched
off and the label is placed onto the product. Then the pad is
moved back into the starting position.
NOTICE!
Please use this method to find the appropriate dispenser
offset in the printer configuration.