Carl Valentin APL 100, Руководство по эксплуатации

Страница: 23 / 58

Applicator APL 100 Installation
11/13 Operating Manual 23
4.5 Mounting the Pad
6
7
8
1
2
3
4
5
Figure 12
1. Pull the tube (6) out of the push-in-fitting.
2. Insert the pin (5) on the pad (8) into the hole on the bottom side of
the pad holder (7).
3. Fix the pad (8) with the screw (1) at the pad holder (7) and make a
rough adjustment of the pad to the printer dispense plate.
4. Insert the vacuum tube (2) an the blowing air tube into the
appropriate push-in-fittings (3,4) of the pad.
5. Insert the tube (6) into the appropriate push-in-fitting on the
cylinder.
CAUTION!
Danger of collision of the pad with other parts of the labelling
system.

Before connecting the applicator to the compressed air
supply please roughly align the pad in all directions..