Carel humiSteam Basic UE001, Руководство пользователя

Страница: 50 / 84

1 0
ENG
“UE B A SIC” +0300042IE - rel . 1 . 6 - 21 . 11 . 2019
2. WATER CONNECTIONS
Important: before proceeding , disconnect the humidi fi er from
the po w er supp l y .
M ode l s UE00 1 to UE0 1 8 M ode l s UE0 2 5 to UE06 5
1
1
4
5
3
4
6
5
4
6
7
2
2
3
Fig. 2 .a
W ater connections:
Ƒ
1 . install a manual valve upstream of the installation (to be able
to cut o ff the water supply);
Ƒ
2 .
connect the humidi fi er to the water supply . On models
UE001 to UE0018 , use a hose with 3/4’’G fi ttings (see par .
11 . 2 “ T echnical speci fi cations” , compatible C A REL hose: code
FWH3415000) . On models UE025 to UE065 connect the hose
with the non - return valve supplied (code FWHDCV0000) to
prevent the water inside the humidi fi er from coming into
contact with the mains water;
Ƒ
3 . install a mechanical fi lter to trap any solid impurities (to be
connected downstream of the tap);
Ƒ
4 connect a section of non - conductive pipe or hose for draining
(resistant to temperatures of 100 °C (212 °F) and with a
minimum inside diameter of 40 mm/1 . 6”);
Ƒ
5 prepare a funnel to interrupt continuity in the drain line;
Ƒ
6 connect a drain trap to prevent the return of bad odours
(minimum inside diameter 40 mm/1 . 6”);
Ƒ
7 in models UE025 to UE0065: connect a drain hose ( minimum
inside diameter 15 mm ( 0 . 59” )) from the bottom tank of the
humidi fi er (this can run into the drain funnel) .
Important : when installation is completed , fl ush the supply hose
for around 30 minutes by piping water directly into the drain ,
without sending it into the humidi fi er . T his will eliminate any scale or
processing residues that may block the drain pump and cause foam
when boiling .
Important : It is mandatory to connect the supply - water piping ,
regardless its material , to the protective earth according to the
applicable national and international safety standards .