User Manual: xr100+_eng
25
Cardioline S.p.A.
Via Linz,151
38121 Trento (TN)
www.cardioline.com
Sales office:
Via F.lli Bronzetti, 8 20129 Milano (MI) Italy tel.+39 02 94750470
fax +39 02 94750471
xr100+
Use the right and left softkeys (
↑
↓
) to select the parameter
to edit.
At
Select
, for example, you can choose the protocol type:
— Step (load increase in steps) or
— Ramp (continuous load increase).
Press
Select
to save the selected protocol type.
To cancel the selection, press the
key.
Figure 7 – 20: Selecting the parameter to edit
All other parameters are edited in the same way.
Using the arrow keys (
↑
↓
), highlight a parameter and
confirm the selection with
Select
: the corresponding value
appears in reverse video and can be changed with the
arrow keys
↑
↓
.
Pressing
Select
will save the new value.
You exit the configuration with
.
Figure 7 – 21: Editing the parameter value
Contrast
The display contrast is adjustable in the range from
0 to 100%.
Figure 7 – 22: Adjusting the display contrast
Load Change
Here you determine the increments for each load change.
Depending on your choice, each key press will change the
load by +/– 1, 5, 10 und 25 Watts.
Figure 7 – 23: Selecting the increment for manual load changes