Cardiac Science Atria 3100, Руководство по эксплуатации

Страница: 77 / 136

Change Recorder Speed, Gain, Frequency Response
70-00082-01 A Atria Electrocardiograph Operating Instructions 7-5
Acquiring a Clean Trace
• To obtain a clean trace with very little noise, ensure
Wait for
Good Data
is set to
ON
in the
ECG
menu. If there is a problem
during a recording, the Atria displays a message. If
necessary, override the error message and continue
recording by pressing the
[ECG]
key again (for more
information, see “Wait for good data” on pg. 4-5).
NOTE: If
Wait for Good Data
is set to
ON
in the
ECG
menu,
then it is possible to press
[ECG]
prior to connecting the
patient. The Atria waits until all leads are connected and the
acquired ECG traces settle (the Atria detects good data)
before automatically starting the ECG.
Change Recorder Speed, Gain, Frequency Response
To temporarily change print settings for the current patient use the
following shortcuts:
NOTE: The updated settings remain in effect until
changed again or the Atria is restarted.
Key Description Selections
[7]
Select paper speed 12.5 mm/s
25 mm/s
50 mm/s
[8]
Selects the ECG gain 5mm/mV
10 mm/mV
20 mm/mV
L10,C5 mm/mV
L20, C10 mm/mV
[9]
Toggles the upper ECG filter frequency response 40 Hz
150 Hz