Cardiac Science Atria 3100, Руководство по эксплуатации

Страница: 68 / 136

6 Patient Preparation
6-6 Atria Electrocardiograph Operating Instructions 70-00082-01 A
Reusable ECG Sensors
Electrolyte
NOTE: Watches or jewelry may be damaged by contact
with electrolyte.
Cardiac Science Corporation recommends using Signa gel
®
electrode gel
with reusable sensors because it provides excellent conductivity between
the skin and sensor.
Reusable sensors (Welsh bulbs and limb plates) must be kept clean. Dirt or
electrolyte build-up may degrade ECG quality:
• Wash after each use (use a mild dish soap if necessary)
• Never use a metallic pad to clean plates and Welsh bulbs (to
avoid damaging the plating)
• Discard if corroded.
Applying limb plates
1. Expose the arms and legs of the patient.
2. Connect sensor straps to the “ears” of the limb plates.
!
Caution
Baseline drift. Never mix patient electrode types or brands. Dissimilar
metals or other incompatibilities may cause considerable baseline drift
and may increase trace recovery time after defibrillation.
!
Caution
Patient skin irritation. Limb Plates may contain nickel, a material that can
cause skin irritation. Monitor the electrode site and, if irritation occurs,
use an alternate electrode.