Cardiac Science Atria 3100, Руководство по эксплуатации

Страница: 52 / 136

5 Communications Setup
5-4 Atria Electrocardiograph Operating Instructions 70-00082-01 A
b.
UTC/GMT Time Zone Offset
- The default is 6 for Central Standard Time
- For other time zones, use the Time Zone listed on
your computer.
NOTE: The Windows UTC/GMT Time Zone Offsets are
the inverse of the Atria. For example, Windows Central
Standard Time is -6, but the Atria notates Central
Standard Time as 6. (The opposite is also true: Perth,
Australia is +8 in Windows and is -8 for the Atria.)
Decrease the time zone value by one hour on the Atria
during Daylight Saving Time (or Summer Time period).
Refer to “Time” on pg. 4-13 to change the current time
setting.
During this period, the displayed current time in Atria
and the network will match, but the time zone values will
be different.
802.11 AND ETHERNET/802.11 CONNECTION SETUP
The Atria uses an 802.11g USB adapter for either a 802.11b or 802.11g
networks. The Atria automatically scans all channels to find the correct
channel used by the access point at a given location.
Use the
Ethernet/802.11
selection to set up both an Ethernet and a 802.11
connection. The system will send the data over a wireless network if a
connection is available. If a wireless connection is not available, connect a
network cable to send the record.
1. Select
Network Type
>
802.11
>
Use DHCP
or
Network Type
>
Ethernet/802.11
>
Use DHCP
.
• (Recommended) Select
ON
for dynamic IP address
assignment.
• Select
OFF
for fixed IP address assignment.
2. Select a setting for
Wireless Security
:
•
None
(Turn off Wireless security)
•
WEP
(Wired Equivalent Privacy)
When Wireless Security is WEP: Select the setting for
Wireless Authentication
:
-
open
-
shared
•
WPA or WPA2 Personal
(Wi-Fi Protected Access)
•
Supplicant Config
(custom configuration)
•
WPA or WPA2 Enterprise
(Wi-Fi Protected Access)