Cardiac Science Atria 3100, Руководство по эксплуатации

Страница: 51 / 136

Grounding
70-00082-01 A Atria Electrocardiograph Operating Instructions 5-3
Grounding
All connected equipment must be IEC 60950 approved or equivalent.
Consult a qualified technician to verify equipment compatibility.
Network Setup
The following communication options require network setup:
• Email
• Printing to network printers
• Sending to EMR via network connection
• Sending to shared location on network
NOTE: Press
[ALT]
+
[H]
to access the
Help
menu. Select
Network Setup
for additional information.
Atria Network Configuration
The facility network must be set up before connecting the Atria to the
network. Use these instructions to configure Ethernet and 802.11
networks.
1. Press
[Home]
and then press
[Setup]
.
2. Select
Send Receive
>
Setup Network Connection
.
ETHERNET CONNECTION SETUP
To set up the network using an RJ-45 Ethernet connection
1. Select
Network Type
>
Ethernet
>
Use DHCP
:
• (Recommended) Select
ON
for dynamic IP address
assignment.
• Select
OFF
for fixed IP address assignment.
2. Enter the following:
a. When DHCP is
OFF
enter:
-
IP address
(IP Address for the Atria, typically
assigned by the network administrator.)
-
Subnet Mask
(typically 255.255.255.0).
-
Gateway
(IP address for the Gateway.)